[ut2004] Problem under Linux

[Andrew Colvin]

I have had a few problems with twinview and other programs that seem to 
stretch their output.  This is why I have set my NVIDIA Card up as two 
seperate devices and utilise Xinerama; UT then only loads on the primary 
display (the OpenGL supported screen).  Unfortunately resize and rotate 
doesn't work in Xinerama mode.

I do not know how to make it work correctly in twinview mode.  

Sorry not really much help from here.
Andrew

On Wednesday 23 June 2004 18:28, Joel Wiramu Pauling wrote:
> Since a while back the nvidia twinview extension has xinerama support...
>
> I'm not looking for setting a seperate screens =-) I'm wanting UT2004 to
> be able to deal with the current layout correctly...
>
> If I have to shutdown X and load an alternate config or even launch a
> new screen it sorta defeats the purpose...
>
> On Wed, 2004-06-23 at 23:46, Andrew Colvin wrote:
> > Yes you need to have a new section in your XF86config file.
> > Personally I use Xinerama and not twinview.  Like this UT2004 starts on
> > the primary screen only.
> > My XF86Config has several setups single, clone, Xinerama (not twinview)
> > as default.
> >
> > If I then want a clone or single screen config I start X (after an rckdm
> > stop) with
> > startx -- -layout single.
> >
> > don't forget to set your DISPLAYMANAGER environment variable.  If I only
> > want to play ut2004 then that is what I set it to.
> >
> > Hope this helps!
> >
> > Andrew
> >
> > On Wednesday 23 June 2004 11:03, Jean Respen - WrackWeb wrote:
> > > Ok my problem is fixed. I've installed the nvidia-glx-dev package, it
> > > works now.
> > >
> > > But another problem appears =) : I've a twinview, with the geforce4...
> > > and so the screen is divided in two parts, and so I can see the
> > > middle... How can I tell ut2004 to start on ONE of my two screens?! is
> > > it possible?
> > >
> > > Le mer 23/06/2004 à 09:56, Jean Respen - WrackWeb a écrit :
> > > > I have many lib like these :
> > > >
> > > > /usr/X11R6/lib/libGL
> > > > libGL.a        libGL.so.1     libGLU.a       libGLU.so.1    libGLw.a
> > > > libGL.so       libGL.so.1.2   libGLU.so      libGLU.so.1.3
> > > >
> > > >
> > > > But not in /usr/X11R6/lib/tls/ but in /usr/X11R6/lib... I must not
> > > > delete these ones?
> > > >
> > > > How can I be sure that 3d acceleration is enabled when I launche the
> > > > game?
> > > >
> > > > Le mer 23/06/2004 à 05:53, Gian Paolo Mureddu a écrit :
> > > > > Jean Respen - WrackWeb wrote:
> > > > > >Hello,
> > > > > >
> > > > > >I'm trying to install UT2004 under Debian Linux. It always tells
> > > > > > me an error at startup :
> > > > > >
> > > > > >./ut2004demo
> > > > > >Could not load OpenGL library
> > > > > >
> > > > > >History:
> > > > > >
> > > > > >Exiting due to error
> > > > > >
> > > > > >If I play with -software mode, it works. What is special, it's
> > > > > > that Quake3 works well, with the openGL support... I've a GeForce
> > > > > > 4MX 64mb, drivers compiled with opengl support...
> > > > > >
> > > > > >Did u have already this problem?
> > > > > >
> > > > > >Need help.
> > > > > >
> > > > > >see u
> > > > >
> > > > > Are you certain you have 3D acceleration enabled when you launch
> > > > > the game? Also try to see if you've got any libraries in your
> > > > > /usr/X11R6/lib/tls/ directory (libGL.so.1.2) if so, remove those
> > > > > and try again.

-- 
Andrew Colvin
apc at abcj.demon.co.uk
ICQ: 44775817
Yahoo Messenger: apcolvin
Jabber: acolvin at jabber.com

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: GnuPG v1.2.2-rc1-SuSE (GNU/Linux)
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==
=AFMd
-----END PGP PUBLIC KEY BLOCK-----
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: signature
URL: <http://icculus.org/pipermail/ut2004/attachments/20040624/99f2bce2/attachment.pgp>