[cod] server: pak1.pk3 not in search path

[Steven Hartland]

You might have too many other pk3 files. Try removing some if you have lots.

    Steve
  ----- Original Message ----- 
  From: Viktor Kaup 
  To: cod at icculus.org 
  Sent: Thursday, November 23, 2006 12:11 AM
  Subject: Re: [cod] server: pak1.pk3 not in search path


  I have already had several attempts at uploading the pak1.pk3 file, so had a few copies lying around from 3 different disks, one from my own regular CoD disk 1, one from my GotY install, and 1 from a friend who uploaded.

  I also ran MD5 checks, it is a match on my home server install and what I have installed on my client.

  When I received the "Impure Client" message, that is received from the client, as I attempt to join the game. 
  Joining other game servers is fine, as well as hosting a Listen server on the client. I'm sure the problem is with the server.

  I'll go and triple-check the MD5, and unzip it.

  If I type in sv_ReferencedPakFiles it ommits pak1.pk3, which I'm pretty sure should be included. (Type this in the server tty console)

  Thanks for the advice Ian, I'll let you know how I get on.


  On 22/11/06, Ian mu <mu.llamas at gmail.com> wrote:
    Sure the pak isn't just corrupt or something? Would deffo try replacing it. (maybe mv it to a temp folder and check if you can unzip it (unzip pak1.pk3), if you can with no errors it sounds ok, if you can't its likely corrupt). (wasn't entirely sure if you mean client or server has the pak problem if only one client has the problem, so check file is in both and can be unzipped if not sure). 



     
    On 11/22/06, Viktor Kaup <furiousv9 at gmail.com > wrote: 
      Hey guys

      I'm having some trouble getting my CoD server fully up and running.

      I can launch the server fine aswell as launch a map. 

      But when it comes to joining the server, it loads like 80% of the map then finally says "Impure client detected. Could not find referenced pak at .....\main\pak1.pk3" 

      It's definetly there.

      When I look at the server console, I noticed in Current Search Path all the paks are there BUT pak1.pk3

      A different CoD server I have at home definetly lists pak1.pk3 and that works fine. 

      Anybody know how to get pak1.pk3 included when the server is launched?

      Spec: 
      Sempron 2800+
      1GB RAM
      80GB Hard Disk
      Debian 3.1 Stable - Kernel 2.4 (I'm gonna upgrade to 2.6 soon)

      Thanks guys 
      Viktor






================================================
This e.mail is private and confidential between Multiplay (UK) Ltd. and the person or entity to whom it is addressed. In the event of misdirection, the recipient is prohibited from using, copying, printing or otherwise disseminating it or any information contained in it. 

In the event of misdirection, illegible or incomplete transmission please telephone +44 845 868 1337
or return the E.mail to postmaster at multiplay.co.uk.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://icculus.org/pipermail/cod/attachments/20061123/cc99a405/attachment.htm>