[cod] +set net_ip
Robert Mount
rmount at pobox.com
Wed May 26 16:34:26 EDT 2004
Check your config file, i've seen a few that have the IP and port listed
(not sure if they do anything, but i've seen it before).
Also try: ps aux | grep 'cod_lnxded'
And make sure you don't have a server already on that port that you didn't
know about.
--Rob
----- Original Message -----
From: "Andrew Urm" <cod at lok1.net>
To: <cod at icculus.org>
Sent: Wednesday, May 26, 2004 4:24 PM
Subject: Re: [cod] +set net_ip
> Nope, appended both net_ip and net_port, but still gives me the same
> error and starts up on :28961.
>
> My command line is:
> ./cod_lnxded +set dedicated 2 +exec ded.cfg +set net_ip 69.9.37.131 +set
> net_port 28960
>
> I have pb_sv_enable in my .cfg and a map_rotate at the bottom of it.
>
> My ifconfig shows the following:
>
> loki at charlene:~/cod131$ /sbin/ifconfig
> eth0 Link encap:Ethernet HWaddr 00:E0:81:27:B7:00
> inet addr:69.9.37.130 Bcast:69.9.37.143 Mask:255.255.255.240
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:30682824 errors:0 dropped:0 overruns:0 frame:0
> TX packets:22237007 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:4202356858 (4007.6 Mb) TX bytes:3465653294 (3305.1
Mb)
> Base address:0x1000 Memory:f4000000-f4020000
>
> eth0:0 Link encap:Ethernet HWaddr 00:E0:81:27:B7:00
> inet addr:69.9.37.131 Bcast:69.255.255.255
Mask:255.255.255.255
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Base address:0x1000 Memory:f4000000-f4020000
>
> eth0:1 Link encap:Ethernet HWaddr 00:E0:81:27:B7:00
> inet addr:69.9.37.132 Bcast:69.255.255.255
Mask:255.255.255.255
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Base address:0x1000 Memory:f4000000-f4020000
>
> eth0:2 Link encap:Ethernet HWaddr 00:E0:81:27:B7:00
> inet addr:69.9.37.133 Bcast:69.255.255.255
Mask:255.255.255.255
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> Base address:0x1000 Memory:f4000000-f4020000
>
> ...and so on.
>
> This is my console output:
>
> loki at charlene:~/cod131$ ./cod_lnxded +set dedicated 2 +exec ded.cfg +set
> net_ip 69.9.37.131 +set net_port 28960
> COD MP 1.4 build linux-i386 Apr 14 2004
> ----- FS_Startup -----
> Current search path:
> /home/loki/.callofduty/main
> /home/loki/cod131/main/zzzpam_sounds.pk3 (12 files)
>
> -snip-
>
> File Handles:
> ----------------------
> 30173 files in pk3 files
> execing default_mp.cfg
> couldn't exec language.cfg
> execing config_mp_server.cfg
> couldn't exec autoexec_mp.cfg
> Hunk_Clear: reset the hunk ok
> Opening IP socket: 69.9.37.131:28960
> ERROR: UDP_OpenSocket: bind: Address already in use
> Opening IP socket: 69.9.37.131:28961
> Hostname: charlene.avidnetworks.net
> Alias: charlene
> IP: 69.9.37.130
> --- Common Initialization Complete ---
> Started tty console (use +set ttycon 0 to disable)
> ^3PunkBuster Server: pb_sv_SsNext = 276322 (0 to 999999)
> ^3PunkBuster Server: pb_sv_LogNext = 24 (1 to 999999)
> ^3PunkBuster Server: 0 Power Players loaded from
> /home/loki/.callofduty/pb/pbpower.dat
> ^3PunkBuster Server: 0 PB Rcon Filters loaded from
> /home/loki/.callofduty/pb/pbrcon.dat
> ^3PunkBuster Server: 0 Map lines loaded from
> /home/loki/.callofduty/pb/pbsvmaps.cfg
> ^3PunkBuster Server: PunkBuster Server (v1.087 | A1335 C1.080) Enabled
> execing ded.cfg
> Hitch warning: 951 msec frame time
> ^3PunkBuster Server: Game Version [COD MP 1.4 build 650 Apr 14 2004
> 15:32:45 linux-i386]
> ^3PunkBuster Server: PunkBuster Server (v1.087 | A1335 C1.080) Enabled
> logfile opened on Wed May 26 14:03:18 2004
>
>
>
> Anyone have any idea?
>
>
> Thanks,
>
> Andrew
>
>
>
> SFC_Elmo wrote:
> > Hi,
> >
> > ..\CoDMP.exe +set dedicated 2 +exec xxx.cfg +set net_ip xxx.xxx.xxx.xxx
+set
> > net_port 28960 +map_rotate
> >
> > ^^ this works here. 3 server at one maschine with 3 different ips
> >
> > regards
> >
> > SFC_Elmo
> > http://www.schussfang.de
> >
> >
> > ----- Original Message -----
> > From: "Andrew Urm" <cod at lok1.net>
> > To: <cod at icculus.org>
> > Sent: Wednesday, May 26, 2004 8:40 AM
> > Subject: [cod] +set net_ip
> >
> >
> >
> >>I have several IPs allocated to me, and I want to host multiple
> >>instances on the same default port 28960. However, when I append a +set
> >>net_ip <unused ip>, I get the following, and it starts with a
> >>non-default port.
> >>
> >>Can anyone give me pointers?
> >>
> >>
> >>File Handles:
> >>----------------------
> >>30173 files in pk3 files
> >>execing default_mp.cfg
> >>couldn't exec language.cfg
> >>execing config_mp_server.cfg
> >>couldn't exec autoexec_mp.cfg
> >>Hunk_Clear: reset the hunk ok
> >>Opening IP socket: 69.9.37.132:28960
> >>ERROR: UDP_OpenSocket: bind: Address already in use
> >>Opening IP socket: 69.9.37.132:28961
> >>Hostname: localhost.
> >>Alias: localhost
> >>IP: 69.9.37.130
> >>
> >>
> >>
> >>Thanks,
> >>
> >>Andrew
> >>
> >>
> >
>
More information about the Cod
mailing list