[cod] +set net_ip

[Andrew Urm]

I've double-checked, and the config is free of ip/port settings.

And ps tells me I only have 1 instance of CoD running under the primary 
ip+port.


-Andrew

Robert Mount wrote:
> Check your config file, i've seen a few that have the IP and port listed
> (not sure if they do anything, but i've seen it before).
> 
> Also try: ps aux | grep 'cod_lnxded'
> 
> And make sure you don't have a server already on that port that you didn't
> know about.
> 
> --Rob
> 
> ----- Original Message ----- 
> From: "Andrew Urm" <cod at lok1.net>
> To: <cod at icculus.org>
> Sent: Wednesday, May 26, 2004 4:24 PM
> Subject: Re: [cod] +set net_ip
> 
> 
> 
>>Nope, appended both net_ip and net_port, but still gives me the same
>>error and starts up on :28961.
>>
>>My command line is:
>>./cod_lnxded +set dedicated 2 +exec ded.cfg +set net_ip 69.9.37.131 +set
>>net_port 28960
>>
>>I have pb_sv_enable in my .cfg and a map_rotate at the bottom of it.
>>
>>My ifconfig shows the following:
>>
>>loki at charlene:~/cod131$ /sbin/ifconfig
>>eth0      Link encap:Ethernet  HWaddr 00:E0:81:27:B7:00
>>           inet addr:69.9.37.130  Bcast:69.9.37.143  Mask:255.255.255.240
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>           RX packets:30682824 errors:0 dropped:0 overruns:0 frame:0
>>           TX packets:22237007 errors:0 dropped:0 overruns:0 carrier:0
>>           collisions:0 txqueuelen:1000
>>           RX bytes:4202356858 (4007.6 Mb)  TX bytes:3465653294 (3305.1
> 
> Mb)
> 
>>           Base address:0x1000 Memory:f4000000-f4020000
>>
>>eth0:0    Link encap:Ethernet  HWaddr 00:E0:81:27:B7:00
>>           inet addr:69.9.37.131  Bcast:69.255.255.255
> 
> Mask:255.255.255.255
> 
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>           Base address:0x1000 Memory:f4000000-f4020000
>>
>>eth0:1    Link encap:Ethernet  HWaddr 00:E0:81:27:B7:00
>>           inet addr:69.9.37.132  Bcast:69.255.255.255
> 
> Mask:255.255.255.255
> 
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>           Base address:0x1000 Memory:f4000000-f4020000
>>
>>eth0:2    Link encap:Ethernet  HWaddr 00:E0:81:27:B7:00
>>           inet addr:69.9.37.133  Bcast:69.255.255.255
> 
> Mask:255.255.255.255
> 
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
>>           Base address:0x1000 Memory:f4000000-f4020000
>>
>>...and so on.
>>
>>This is my console output:
>>
>>loki at charlene:~/cod131$ ./cod_lnxded +set dedicated 2 +exec ded.cfg +set
>>net_ip 69.9.37.131 +set net_port 28960
>>COD MP 1.4 build linux-i386 Apr 14 2004
>>----- FS_Startup -----
>>Current search path:
>>/home/loki/.callofduty/main
>>/home/loki/cod131/main/zzzpam_sounds.pk3 (12 files)
>>
>>-snip-
>>
>>File Handles:
>>----------------------
>>30173 files in pk3 files
>>execing default_mp.cfg
>>couldn't exec language.cfg
>>execing config_mp_server.cfg
>>couldn't exec autoexec_mp.cfg
>>Hunk_Clear: reset the hunk ok
>>Opening IP socket: 69.9.37.131:28960
>>ERROR: UDP_OpenSocket: bind: Address already in use
>>Opening IP socket: 69.9.37.131:28961
>>Hostname: charlene.avidnetworks.net
>>Alias: charlene
>>IP: 69.9.37.130
>>--- Common Initialization Complete ---
>>Started tty console (use +set ttycon 0 to disable)
>>^3PunkBuster Server: pb_sv_SsNext = 276322 (0 to 999999)
>>^3PunkBuster Server: pb_sv_LogNext = 24 (1 to 999999)
>>^3PunkBuster Server: 0 Power Players loaded from
>>/home/loki/.callofduty/pb/pbpower.dat
>>^3PunkBuster Server: 0 PB Rcon Filters loaded from
>>/home/loki/.callofduty/pb/pbrcon.dat
>>^3PunkBuster Server: 0 Map lines loaded from
>>/home/loki/.callofduty/pb/pbsvmaps.cfg
>>^3PunkBuster Server: PunkBuster Server (v1.087 | A1335 C1.080) Enabled
>>execing ded.cfg
>>Hitch warning: 951 msec frame time
>>^3PunkBuster Server: Game Version [COD MP 1.4 build 650 Apr 14 2004
>>15:32:45 linux-i386]
>>^3PunkBuster Server: PunkBuster Server (v1.087 | A1335 C1.080) Enabled
>>logfile opened on Wed May 26 14:03:18 2004
>>
>>
>>
>>Anyone have any idea?
>>
>>
>>Thanks,
>>
>>Andrew
>>
>>
>>
>>SFC_Elmo wrote:
>>
>>>Hi,
>>>
>>>..\CoDMP.exe +set dedicated 2 +exec xxx.cfg +set net_ip xxx.xxx.xxx.xxx
> 
> +set
> 
>>>net_port 28960 +map_rotate
>>>
>>>^^ this works here. 3 server at one maschine with 3 different ips
>>>
>>>regards
>>>
>>>SFC_Elmo
>>>http://www.schussfang.de
>>>
>>>
>>>----- Original Message ----- 
>>>From: "Andrew Urm" <cod at lok1.net>
>>>To: <cod at icculus.org>
>>>Sent: Wednesday, May 26, 2004 8:40 AM
>>>Subject: [cod] +set net_ip
>>>
>>>
>>>
>>>
>>>>I have several IPs allocated to me, and I want to host multiple
>>>>instances on the same default port 28960. However, when I append a +set
>>>>net_ip <unused ip>, I get the following, and it starts with a
>>>>non-default port.
>>>>
>>>>Can anyone give me pointers?
>>>>
>>>>
>>>>File Handles:
>>>>----------------------
>>>>30173 files in pk3 files
>>>>execing default_mp.cfg
>>>>couldn't exec language.cfg
>>>>execing config_mp_server.cfg
>>>>couldn't exec autoexec_mp.cfg
>>>>Hunk_Clear: reset the hunk ok
>>>>Opening IP socket: 69.9.37.132:28960
>>>>ERROR: UDP_OpenSocket: bind: Address already in use
>>>>Opening IP socket: 69.9.37.132:28961
>>>>Hostname: localhost.
>>>>Alias: localhost
>>>>IP: 69.9.37.130
>>>>
>>>>
>>>>
>>>>Thanks,
>>>>
>>>>Andrew
>>>>
>>>>
>>>
> 
> 
> 
>