[mohaa] Server restart script

Wed Aug 18 09:17:15 EDT 2004

In this case bash is trting to execute your mohaa config file lines.
Change this in startserver.sh and serverkill.sh you should include the bash 
parameters not the server parameters ;)
Remember the . at beginning of line this is needed to include the file in 
current bash script :)

#Put here path to config file
. /path to this file/serverconfig.sh

Ciao
         Luca

At 15.13 18/08/2004, you wrote:
>Hey, i got these 3 files now
>
>serverconfig.sh
>
>#Root directory
>GAMEDIR="/opt/lampp/htdocs/MOHAA2"
>#Program to run
>PROG="./spearhead_lnxded"
>#Port
>PORT="12203"
>#Gamespy port
>GSPORT="12307"
>#Config
>CONFIG="server.cfg"
>
>startserver.sh
>
>#Put here path to config file
>  /opt/lampp/htdocs/MOHAA2/mainta/server.cfg
>#Enters game dir
>cd $GAMEDIR
>#Loop forever
>while [ 1 ]
>do
>#Check for a specific IP to set
>if [ "$IP" == "67.18.236.202" ]
>then
>   IPS="67.18.236.202"
>else
>   IPS=" +set net_IP $IP"
>fi
>#Starts the server
>$PROG +exec $CONFIG +set net_port $PORT +set net_ip $IPS +set
>net_gamespy_port $GSPORT
>+set vm_game 0 +set ttycon 0 +set dedicated 2
># Sleep a while
>sleep 10
>done
>
>serverkill.sh
>
>#Put here path to config file
>  serverconfig.sh
>#Searches for pid of server
>ps auxwww | grep $PROG | grep $PORT | grep $CONFIG | grep -v grep | gawk
>'{print $2}' | xargs kill
>#Checks kill exit status
>if [ 0 != $? ]
>then
>      echo "Server Down"
>else
>      echo "Server Killed"
>fi
>
>
>When i run the command ./startserver.sh
>
>i got these lines come up
>
>
>/startserver.sh: line 1: sv_hostname: command not found
>/startserver.sh: line 9: sv_maxclients: command not found
>/startserver.sh: line 10: timelimit: command not found
>/startserver.sh: line 11: fraglimit: command not found
>/startserver.sh: line 12: maprotationtime: command not found
>/startserver.sh: line 14: roundlimit: command not found
>/startserver.sh: line 42: map: command not found
>/startserver.sh: line 43: sv_maplist: command not found
>/startserver.sh: line 44: sv_runspeed: command not found
>/startserver.sh: line 16: +exec: command not found
>/startserver.sh: line 17: +set: command not found
>/startserver.sh: line 16: +exec: command not found
>/startserver.sh: line 17: +set: command not found
>
>and the server wont start, Any ideas?
>
>Thanks
>
>----- Original Message -----
>From: "Luca Fabbro" <luca.fabbro at procne.it>
>To: <mohaa at icculus.org>
>Sent: Wednesday, August 18, 2004 9:20 AM
>Subject: Re: [mohaa] Server restart script
>
>
> > I'm using the following files to kill the right mohaa process
> >
> > I'm not using screen so if you whant to use it you shold change the row
> > that starts the server :)
> >
> > A kinfd of config in one file
> >
> > #Root directory
> > GAMEDIR="/usr/local/games/mohaa"
> > #Program to run
> > PROG="./mohaa_lnxded"
> > #Port
> > PORT="12210"
> > #Gamespy port
> > GSPORT="12307"
> > #Config
> > CONFIG="my_mohaa.cfg"
> >
> > The start up script
> >
> > #Put here path to config file
> > . my_config_file
> > #Enters game dir
> > cd $GAMEDIR
> > #Loop forever
> > while [ 1 ]
> > do
> > #Check for a specific IP to set
> > if [ "$IP" == "" ]
> > then
> >   IPS=""
> > else
> >   IPS=" +set net_IP $IP"
> > fi
> > #Starts the server
> > $PROG +exec $CONFIG +set net_port $PORT$IPS +set net_gamespy_port $GSPORT
> > +set vm_game 0 +set ttycon 0 +set dedicated 2
> > # Sleep a while
> > sleep 10
> > done
> >
> > The kill script is the following
> > #Put here path to config file
> > . my_config_file
> > #Searches for pid of server
> > ps auxwww | grep $PROG | grep $PORT | grep $CONFIG | grep -v grep | gawk
> > '{print $2}' | xargs kill
> > #Checks kill exit status
> > if [ 0 != $? ]
> > then
> >      echo "Server Down"
> > else
> >      echo "Server Killed"
> > fi
> >
> > Hope that this helps
> >
> > Ciao
> >          Luca
> >
> > At 02.41 18/08/2004, you wrote:
> > >Hey Josh, i got that script working to write the PID file, and it
>displays
> > >the PID with other numbers Quote:
> > >
> > >    3887  2141 69 03
> > >
> > >Could you help me with a full script that could run that then kill the
>prces
> > >number which would be 3887,
> > >
> > >Would be the greatest help iv had.
> > >
> > >Thankyou
> > >----- Original Message -----
> > >From: "Josh Berry" <games at chickenmonkey.co.uk>
> > >To: <mohaa at icculus.org>
> > >Sent: Wednesday, August 18, 2004 12:09 AM
> > >Subject: Re: [mohaa] Server restart script
> > >
> > >
> > > > For a quick and very, very dirty hack you can do:
> > > >
> > > > ps -ef | grep mohaa_lnxded | grep -v grep > temp; sed 's/    /:/g'
>temp
> > > > > temp2; gawk -F: '{ print $2 }' temp2
> > > >
> > > > This will print the PID of the mohaa process to console. Alternatively
> > > > you could add a "> pid.txt" onto the end to write the pid to a file
> > > > called pid.txt. Note that this will create two temporary files in the
> > > > location of the script.
> > > >
> > > > You can then read from the file and into other scripts to do whatever
> > > > with.
> > > >
> > > > If you run multiple servers on one box then you will have to modify
>the
> > > > grep bit to make it return only a single line ... so for example
> > > >
> > > > ps -ef | grep mohaa_lnxded | grep 123.123.123.123 | grep -v grep >
>temp
> > > >
> > > > where 132.etc is the IP address of your server (assuming you have
>"+set
> > > > net_IP 123.123.123.123" in the startup line for your server so it
> > > > displays when you do a ps -ef
> > > >
> > > > Hope that helps
> > > > josh
> > > >
> > > > On Tue, 2004-08-17 at 21:47, Andrew (KARZAC) Furbey wrote:
> > > > > You can run scripts up using php commands over the web(aslong as its
>on
> > >the
> > > > > same box), thats how i can start my servers, im trying to figure
>away
> > >for a
> > > > > script to find the PID for a program running and kill it, but the
>PID
> > > > > changes everytime, im not that advanced at coding yet :/
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Robert Mount" <rmount at pobox.com>
> > > > > To: <mohaa at icculus.org>
> > > > > Sent: Tuesday, August 17, 2004 6:40 PM
> > > > > Subject: [mohaa] Server restart script
> > > > >
> > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "Andrew (KARZAC) Furbey" <andrewfurbey at hotmail.com>
> > > > > > To: <mohaa at icculus.org>
> > > > > > Sent: Tuesday, August 17, 2004 11:53 AM
> > > > > > Subject: Re: [mohaa] mohaa process freezes
> > > > > >
> > > > > >
> > > > > > > does anyone know of a script that can restart a server when it
> > >crashes
> > > > > BUT
> > > > > > > it leaves the procces running, i think it might be what your
>talking
> > > > > > > about,
> > > > > > > but i was running the server as "root", and it used to crash
>about
> > >twice
> > > > > a
> > > > > > > day also, then created a user account and started it via that,
>and
> > >its
> > > > > > > still
> > > > > > > running, no crashes 2 days later.
> > > > > >
> > > > > > Here's my script:
> > > > > >
> > > > > > ****
> > > > > > #!/bin/bash
> > > > > > #
> > > > > > # MOH Server loop
> > > > > > #
> > > > > > clear
> > > > > >
> > > > > > while [ 1 ]         # Loop `forever'
> > > > > > do
> > > > > > echo "Starting the server"
> > > > > > cd /home/mohsh01
> > > > > > screen -m -D -S mohsh01 ./spearhead_lnxded +set net_ip 1.1.1.1
>+exec
> > > > > > server.cfg
> > > > > > sleep 60
> > > > > > echo "Done sleeping"
> > > > > >
> > > > > > done
> > > > > > *****
> > > > > >
> > > > > > I use this command from another script to start my servers:
> > > > > > su mohsh01 -c "/opt/control/mohsh01 &"
> > > > > >
> > > > > > I run this as the user "mohsh01" not as root.  Only problem with
>this
> > >is
> > > > > > there's no web control for it that i can figure out.  I'd love to
>have
> > >a
> > > > > > looper (as above) with some way to shut the server down over the
>web.
> > > > > >
> > > > > > --Rob
> > > > > >
> > > > > >
> > > > > >
> > > >
> > > >
> >
> >