[cod] problems getting it up.

[Jerry Zimmerman van Woesik]

Thnx Guys,

you are both right .... it works now.

Cheers
B4M

Christian Marvel schreef:
> Your trying to bring up a interface on a box where the ip you are selecting
> to use does not exist.
>
>
> -----Original Message-----
> From: Jerry Zimmerman van Woesik [mailto:jerry at bambamlan.nl] 
> Sent: Tuesday, November 27, 2007 6:24 AM
> To: cod mailing list
> Subject: [cod] problems getting it up.
>
> Hi all,
>
> First of : Thnx Ryan for your effort.
>
> Now the problem , iv'e been trying to get my server up on a linux 
> machine behind a router (wrt54g)
> I have been using this command line :
> ./cod4_lnxded +set net_ip 123.456.789.000 +set dedicated 2 +set 
> sv_punkbuster 1 +exec testserver.cfg
>
> 123.456.789.000 being my outside ip adress.
>
> In the router I have forwarded  like this :
>
> port 28960 --> 192.168.0.33:28960 tcp/udp
> port 50500 --> 192.168.0.33:20500 udp
> port 50510 --> 192.168.0.33:50510 udp
>
> When I start the server I get slapped with these messages :
>
> ......
> execing default_mp_gamesettings.cfg from disk
> execing server_map.cfg from disk
> execing language.cfg from disk
> dedicated is read only.
> Opening IP socket: 123.456.789.000:28960
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28961
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28962
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28963
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28964
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28965
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28966
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28967
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28968
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> Opening IP socket: 123.456.789.000:28969
> WARNING: UDP_OpenSocket: bind: Cannot assign requested address
> WARNING: Couldn't allocate IP portdedicated is read only.
> sv_punkbuster is write protected.
> end $init 298 ms
> Loading fastfile code_post_gfx_mp
> Loading fastfile localized_code_post_gfx_mp
> Loading fastfile ui_mp
> Loading fastfile common_mp
> .....
>
> Any ideas what goes wrong here ??
> I use this exact same setup for my cod 2 server (obviously without the 
> 20500 and 20510 udp ports) and it works like a charm.
>
> Cheers
> B4M
>
> ---
> To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
>
>
>
> ---
> To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
>
>
>