[openbox] mplayer in fullscreen has outline still visible

Mon Mar 10 12:32:15 EDT 2008

On 11:15 Mon 10 Mar     , Mike Hokenson wrote:
>
> On Monday, March 10, 2008 at 09:09AM, Clay Barnes wrote:
>>> It does, remove this line from .mplayer/config, or change it to just  
>>> fullscreen:
>>> fstype = above,fullscreen       # Make fullscreen set the right hints
>>
>> I tried both removing the line and changing it, but I get the same
>> effect.
>
> make sure that's also not in ~/.mplayer/gui.conf
>

Nope, not there.  I'm attaching /etc/mplayer/mplayer.conf and
~/.mplayer/gui.conf in case I'm missing something else.

-- 
Clay Barnes

Website:
http://www.hci-matters.com

GPG Public Key (Fingerprint 0xbb14 fce2 1199 c413):
http://www.hci-matters.com/keys/claybarnes_public_key_until20080718.gpg
-------------- next part --------------
enable_audio_equ = "no"
vo_driver = "xv"
vo_panscan = "0.000000"
vo_doublebuffering = "no"
vo_direct_render = "no"
vo_dxr3_device = "/dev/em8300-0"
v_framedrop = "1"
v_flip = "0"
v_ni = "no"
v_idx = "-1"
vf_pp = "no"
vf_autoq = "0"
vf_lavc = "no"
ao_driver = "alsa"
ao_volnorm = "no"
softvol = "no"
ao_surround = "no"
ao_extra_stereo = "no"
ao_extra_stereo_coefficient = "1.000000"
dvd_device = "/dev/dvd"
cdrom_device = "/dev/dvd"
osd_level = "1"
sub_auto_load = "yes"
sub_unicode = "no"
ass_enabled = "no"
ass_use_margins = "no"
ass_top_margin = "0"
ass_bottom_margin = "0"
sub_pos = "100"
sub_overlap = "no"
font_factor = "0.750000"
font_name = "Sans"
font_text_scale = "5.000000"
font_osd_scale = "6.000000"
font_blur = "2.000000"
font_outline = "2.000000"
font_autoscale = "3"
cache = "yes"
cache_size = "1048576"
playbar = "yes"
load_fullscreen = "no"
show_videowin = "yes"
stopxscreensaver = "yes"
autosync = "no"
autosync_size = "0"
gui_skin = "default"
gui_save_pos = "yes"
gui_main_pos_x = "1435"
gui_main_pos_y = "583"
gui_video_out_pos_x = "473"
gui_video_out_pos_y = "212"
equ_band_00 = "0.000000"
equ_band_01 = "0.000000"
equ_band_02 = "0.000000"
equ_band_03 = "0.000000"
equ_band_04 = "0.000000"
equ_band_05 = "0.000000"
equ_band_06 = "0.000000"
equ_band_07 = "0.000000"
equ_band_08 = "0.000000"
equ_band_09 = "0.000000"
equ_band_10 = "0.000000"
equ_band_11 = "0.000000"
equ_band_12 = "0.000000"
equ_band_13 = "0.000000"
equ_band_14 = "0.000000"
equ_band_15 = "0.000000"
equ_band_16 = "0.000000"
equ_band_17 = "0.000000"
equ_band_18 = "0.000000"
equ_band_19 = "0.000000"
equ_band_20 = "0.000000"
equ_band_21 = "0.000000"
equ_band_22 = "0.000000"
equ_band_23 = "0.000000"
equ_band_24 = "0.000000"
equ_band_25 = "0.000000"
equ_band_26 = "0.000000"
equ_band_27 = "0.000000"
equ_band_28 = "0.000000"
equ_band_29 = "0.000000"
equ_band_30 = "0.000000"
equ_band_31 = "0.000000"
equ_band_32 = "0.000000"
equ_band_33 = "0.000000"
equ_band_34 = "0.000000"
equ_band_35 = "0.000000"
equ_band_36 = "0.000000"
equ_band_37 = "0.000000"
equ_band_38 = "0.000000"
equ_band_39 = "0.000000"
equ_band_40 = "0.000000"
equ_band_41 = "0.000000"
equ_band_42 = "0.000000"
equ_band_43 = "0.000000"
equ_band_44 = "0.000000"
equ_band_45 = "0.000000"
equ_band_46 = "0.000000"
equ_band_47 = "0.000000"
equ_band_48 = "0.000000"
equ_band_49 = "0.000000"
equ_band_50 = "0.000000"
equ_band_51 = "0.000000"
equ_band_52 = "0.000000"
equ_band_53 = "0.000000"
equ_band_54 = "0.000000"
equ_band_55 = "0.000000"
equ_band_56 = "0.000000"
equ_band_57 = "0.000000"
equ_band_58 = "0.000000"
equ_band_59 = "0.000000"
-------------- next part --------------
#
# MPlayer configuration file
#
# Configuration files are read system-wide from /usr/local/etc/mplayer.conf
# and per user from ~/.mplayer/config, where per-user settings override
# system-wide settings, all of which are overrriden by the command line.
#
# The configuration file settings are the same as the command line
# options without the preceding '-'.
#
# See the CONFIGURATION FILES section in the man page
# for a detailed description of the syntax.

##################
# video settings #
##################

# Specify default video driver (see -vo help for a list).
#vo=xv

# Use SDL video with the aalib subdriver by default.
#vo = sdl:aalib

# FBdev driver:
#
# mode to use (read from fb.modes)
#fbmode = 640x480-120
#
# location of the fb.modes file
#fbmodeconfig = /etc/fb.modes

# Specify your monitor timings for the vesa and fbdev video output drivers.
# See /etc/X11/XF86Config for timings. Be careful; if you specify settings
# that exceed the capabilities of your monitor, you may damage it.
#
# horizontal frequency range (k stands for 1000)
#monitor-hfreq = 31.5k-50k,70k
#
# vertical frequency range
#monitor-vfreq = 50-90
#
# dotclock (or pixelclock) range (m stands for 1000000)
#monitor-dotclock = 30M-300M

# Start in fullscreen mode by default.
#fs=yes

# Change to a different videomode when going fullscreen.
#vm=yes

# Override the autodetected color depth, may need 'vm=yes' as well.
#bpp=0

# Enable software scaling (powerful CPU needed) for video output
# drivers that do not support hardware scaling.
#zoom=yes

# standard monitor size, with square pixels
#monitoraspect=4:3

# Use this for a widescreen monitor, non-square pixels.
#monitoraspect=16:9

# Keep the player window on top of all other windows.
#ontop=yes

##################
# audio settings #
##################

# Specify default audio driver (see -ao help for a list).
ao=alsa

# Use SDL audio driver with the esd subdriver by default.
#ao = sdl:esd

# Specify the mixer device.
#mixer = /dev/mixer

# Resample the sound to 44100Hz with the lavcresample audio filter.
#af=lavcresample=44100

##################
# other settings #
##################

# Drop frames to preserve audio/video sync.
#framedrop = yes

# Specify your preferred skin here (skins are searched for in
# /usr/local/share/mplayer/skins/<name> and ~/.mplayer/skins/<name>).
#skin = Abyss

# Resample the font alphamap.
# 0     plain white fonts
# 0.75  very narrow black outline (default)
# 1     narrow black outline
# 10    bold black outline
#ffactor = 0.75

# cache settings
#
# Use 8MB input cache by default.
#cache = 8192
#
# Prefill 20% of the cache before starting playback.
#cache-min = 20.0
#
# Prefill 50% of the cache before restarting playback after the cache emptied.
#cache-seek-min = 50

# DVD: Display English subtitles if available.
#slang = en

# DVD: Play English audio tracks if available.
#alang = en

# get a default OSD font from fontconfig

fontconfig = yes
font = "Sans"
subfont-text-scale = 3

# You can also include other configuration files.
#include = /path/to/the/file/you/want/to/include
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://icculus.org/pipermail/openbox/attachments/20080310/9cfbe586/attachment.pgp>