[cod] What is the secret behind masterserver-list?

[Rick Payton]

Ok, thanks, I'll try that right now. Nope, still not listed. I'll shut
it down for a bit, and see what happens.

 

Here's my command line arg's: +set dedicated 2 +set sv_punkbuster 1 +set
net_port 28960 +set net_ip 192.168.10.4 +exec server.cfg +map_rotate

 

Rick Payton, I.T. Manager

Morikawa & Associates, LLC

(808) 572-1745 Office

(808) 572-6323 Fax

www.mai-hawaii.com <http://www.mai-hawaii.com> 

________________________________

From: Donald Stephens [mailto:donald.stephens at activant.com] 
Sent: Monday, February 04, 2008 3:59 PM
To: cod at icculus.org
Subject: RE:[cod] What is the secret behind masterserver-list?

 

If you're doing NAT you need to have the internal IP in the command line
and not the external IP.

 

-Don

 

________________________________

From: Rick Payton [mailto:rick at mai-hawaii.com]
Sent: Mon 2/4/2008 5:42 PM
To: cod at icculus.org
Subject: RE: [cod] What is the secret behind masterserver-list?

Negative. Net_port is set via command line. Net_ip is not set at all,
due to the physical address being a 192.168.x.x IP.

I'll try it, and see what breaks :P  Should I stick with setting them
via CLI, or put them in the config file? If I recall, at one point I did
have the port set via config file, but it didn't do anything .... which
is when I set it via CLI.

Rick Payton, I.T. Manager
Morikawa & Associates, LLC
(808) 572-1745 Office
(808) 572-6323 Fax
www.mai-hawaii.com

-----Original Message-----
From: l8rg8r [mailto:l8rg8r at gmail.com]
Sent: Monday, February 04, 2008 3:34 PM
To: cod at icculus.org
Subject: Re: [cod] What is the secret behind masterserver-list?

Rick,
Just going through the motions here, have you set:
// Server Network Settings
set net_ip "67.52.67.91"
set net_port "28960"
in your server.cfg file?

Rick Payton wrote:
> Yes, after I patched I was actually down for about 3 hours. I have
opened (forwarded) the following ports:
>
> 28960 TCP/UDP (was originally just UDP, but added in the TCP to see if
that helped)
> 20800 UDP
> 20810 UDP
>
> Did I forget a port, or do I need to open the TCP ports as well?
Firewall is a Fortigate-60 if that helps.
>
> Rick Payton, I.T. Manager
> Morikawa & Associates, LLC
> (808) 572-1745 Office
> (808) 572-6323 Fax
> www.mai-hawaii.com
> -----Original Message-----
> From: l8rg8r [mailto:l8rg8r at gmail.com]
> Sent: Monday, February 04, 2008 2:36 PM
> To: cod at icculus.org
> Subject: Re: [cod] What is the secret behind masterserver-list?
>
> Rick,
> Are you behind a firewall, I ping your server at 125-150, you appear
to
> be running the current version. After the patch did you shutdown for
> 20-30 minutes, mine did not show up after the patch, I kept checking
for
> 2 hours, then I shut down for about 30 mins and when I restarted the
> server it was on the in-game browser and listed using the audit tool.
> Dont know if this will help, but it cant hurt to try.
> Robert

---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38




 

 

Notice: This transmission is for the sole use of the intended
recipient(s) and may contain information that is confidential and/or
privileged.  If you are not the intended recipient, please delete this
transmission and any attachments and notify the sender by return email
immediately.  Any unauthorized review, use, disclosure or distribution
is prohibited.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://icculus.org/pipermail/cod/attachments/20080204/039a9886/attachment.htm>