[cod] sorry edit

[BludGeonT[EUG]]

Geez,

guess I should read on before posting replies.  I replied to Sentry's
previous email with the same information.  Sorry to be part of The
Department of Rendunancy Department.

;)

Glad it fixed it for you though

BludGeonT[EUG]
Earthlink Ultimate Gaming


On Sat, 26 Mar 2005 14:00:51 -0600, Jay Vasallo <jayco1 at charter.net> wrote:
> NP... map_rotate is always the last thing the server line should do. Glad i
> could help you.
> 
> ----- Original Message -----
> From: "Mr Sentry" <mrsentry at gmail.com>
> To: <cod at icculus.org>
> Sent: Saturday, March 26, 2005 2:57 AM
> Subject: Re: [cod] sorry edit
> 
> > Jay,
> > I fixed it! don't know how (lol)
> > I believe it was the +map_rotate
> > I did'nt have it on the end.
> > thank you for your fast reply,
> > If you would like the logs (when it would freeze, there was no logs)
> > or the server config
> > just let me know.
> > Thank you for your time.
> > Dana
> >
> >
> > On Sat, 26 Mar 2005 00:47:56 -0600, Jay Vasallo <jayco1 at charter.net>
> > wrote:
> >> http://files.clanwarz.net/temp/codhelp.txt
> >>
> >> You can see it better here. The mail gets crunched up a bit.
> >>
> >>
> >> ----- Original Message -----
> >> From: "Jay Vasallo" <jayco1 at charter.net>
> >> To: <cod at icculus.org>
> >> Sent: Saturday, March 26, 2005 12:39 AM
> >> Subject: Re: [cod] sorry edit
> >>
> >> > Sup Dana,
> >> >
> >> > Can you append  the server log and email it back to us so we can see
> >> > the
> >> > last thing the server tried to do. The server log is normally in the
> >> > mod
> >> > you are trying to start. And I am not completely sure but you can
> >> > remove
> >> > this:
> >> >
> >> > +set fs_homepath /home/cod2/cod
> >> >
> >> > If I am not mistaken, that is used if you are starting the cod game in
> >> > another location. Normally you start it and then point to the homepath
> >> > for
> >> > the user. But that is not your problem atm thou.
> >> >
> >> > You also have the "&" sign at the end of the command. That is used if
> >> > you
> >> > are not using screen.  Not sure if you missed the
> >> > _ under the map_rotate but it doesn't show. Try this for a command
> >> > line:
> >> >
> >> > #!/bin/sh
> >> > start=`date '+%H:%M on %d/%m/%y'`
> >> > echo "swat server started @ $start">>/home/cod2/swat.log
> >> > screen -dmS CoD ./cod_lnxded +set dedicated 2 +set net_ip 67.19.211.218
> >> > +set net_port 28960 \
> >> > +set fs_basepath /home/cod2/cod +set fs_game swat +exec dedicated.cfg
> >> > +map_rotate \
> >> >
> >> > and if you need the homepath in there here it is:
> >> >
> >> > #!/bin/sh
> >> > start=`date '+%H:%M on %d/%m/%y'`
> >> > echo "swat server started @ $start">>/home/cod2/swat.log
> >> > screen -dmS CoD ./cod_lnxded +set dedicated 2 +set net_ip 67.19.211.218
> >> > +set net_port 28960 \
> >> > +set fs_homepath /home/cod2/cod +set fs_basepath /home/cod2/cod +set
> >> > fs_game swat  \
> >> > +exec dedicated.cfg +map_rotate \
> >> >
> >> >
> >> > If you noticed I use the " \ " sign one space after the last command I
> >> > want on that line. It tells the linux server to start
> >> > to read the next line. Good for troubleshooting because you can always
> >> > see
> >> > the script in front of you and nothing off the screen.
> >> >
> >> > Hope this helps you.
> >> > =o)
> >> >
> >> >
> >> >
> >> > ----- Original Message -----
> >> > From: "Mr Sentry" <mrsentry at gmail.com>
> >> > To: <cod at icculus.org>
> >> > Sent: Saturday, March 26, 2005 12:22 AM
> >> > Subject: [cod] sorry edit
> >> >
> >> >
> >> >> Sorry when I copied and pasted I did'nt proof read
> >> >> I have been try to get a cod SWAT mod server up and running with no
> >> >> results
> >> >>
> >> >> the server is running RHEL 3.0
> >> >> and it will just not run!
> >> >>
> >> >> On the same server I have a Revolt_UO server up and it runs just fine!
> >> >> not a single crash!
> >> >>
> >> >> I followed the instructions as per the devlopers and "no go"
> >> >> and no logs either. it shows running in the process list (ps -A)
> >> >> and I start the server through a shell script like this
> >> >>
> >> >> #!/bin/sh
> >> >> start=`date '+%H:%M on %d/%m/%y'`
> >> >> echo "swat server started @ $start">>/home/cod2/swat.log
> >> >> # the following is one single line
> >> >> screen -A -m -d -S CoD ./cod_lnxded
> >> >> +set dedicated 2 +set net_ip 67.19.211.218 +set net_port 28960 +map
> >> >> rotate +set fs_homepath /home/cod2/cod +set fs_basepath /home/cod2/cod
> >> >> +set fs_game swat +exec dedicated.cfg&
> >> >>
> >> >> I am completly baffled
> >> >> I have been a quake3 linux server admin for 4 years and I can not
> >> >> figure this out!
> >> >> any suggestions or help would be greatfully apreciated (gg spelling)
> >> >>
> >> >> Thank you
> >> >> Dana
> >> >> --
> >> >> --==## Who Frags Ya? Baby ##==--
> >> >>
> >> >
> >> >
> >>
> >>
> >
> >
> > --
> > --==## Who Frags Ya? Baby ##==--
> >
> 
>