[ut3] Older Linux Servers

[Sunderhaus, Cory]

Thanks guys.  I will have everyone use this command instead of going through
the list.  Does anyone have input on my first question?

> 1. I have an older Proliant HP server that has dual PIII Zeon 
> processors, 4 gig of RAM, and about 200 GB of HD space (Great little 
> Linux box). I have been reading that the Linux install was compiled 
> with SSE2 extensions and this would be the reason I am getting the 
> “Illegal instruction” error message. When the full version of the game 
> is released will this still be the case or should I start looking for 
> some P4 processors now?

-C


-----Original Message-----
From: Ondřej Hošek [mailto:ondra.hosek at gmail.com] 
Sent: Thursday, October 18, 2007 11:57 AM
To: ut3 at icculus.org
Subject: Re: [ut3] Older Linux Servers

The command is "open <ip_address>", such as "open 10.0.0.8". Don't type 
the quotes.

~~ Ondra

On 18.10.07 17:39 Uhr, Sunderhaus, Cory wrote:
> Thanks everyone, 
>
>      Jan, How do you connect directly to an IP from the UT3 client?  I
cannot
> find it in the GUI as an option.  Is there a ~ command to do this?
>
> Let me get this right,  The only ports that you have seen that need to be
> forwarded is 13000 and 7777 for the server.  I have to go back and double
> check, because friends can see the server in the list but never connect the
> way it is set up currently (unless of course I take my router out of the
> equation).
>
> Thanks again,
> -C
>
> -----Original Message-----
> From: cdx [mailto:codex at grytz.net] 
> Sent: Thursday, October 18, 2007 10:46 AM
> To: ut3 at icculus.org
> Subject: Re: [ut3] Older Linux Servers
>
> Arnaud De Mouhy wrote:
>   
>> Its completely random for the client. Only the server has to have a 
>> fixed port. This is a fundamental of NAT/PAT :)
>>
>> Arnaud
>>
>> Le 19 oct. 07 à 16:27, Sander a écrit :
>>
>>     
>>> cdx wrote:
>>>       
>>>> Hi Cory,
>>>> netstat -nap will tell you this
>>>>
>>>> 1 udp 0 0 0.0.0.0:13000 0.0.0.0:* 2644/ut3demo-bin
>>>> 2 udp 0 0 0.0.0.0:7777 0.0.0.0:* 2644/ut3demo-bin
>>>>
>>>> 3 tcp 0 0 0.0.0.0:43821 0.0.0.0:* LISTEN 2644/ut3demo-bin
>>>> 4 udp 0 0 0.0.0.0:32769 0.0.0.0:* 2644/ut3demo-bin
>>>>
>>>> 5 tcp 0 0 192.168.2.100:34810 207.38.11.34:29900 ESTABLISHED 
>>>> 2644/ut3demo-bin
>>>>
>>>> 1 and 2 are fixed ports, 3 and 4 are random (and afaik can not be 
>>>> fixed in the linux version), but not needed for establishing 
>>>> connections from the internet, but i dont know if the server will 
>>>> appear on the list
>>>> 5 is afaik just the connection to the master server
>>>>
>>>> i only forward 1 and 2, because its a private clanserver, and 
>>>> therefor its not important to be listet in the server list
>>>>
>>>> sorry for my bad english
>>>> best regards
>>>> Jan
>>>>         

---
To unsubscribe, send a blank email to ut3-unsubscribe at icculus.org
Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?64