[ut2003io] problems on debain woody
s-y-l at gmx.net
Wed Dec 18 19:35:02 EST 2002
0n 02/12/14 at 15:38 Ryan C. Gordon told me:
> >I tried to install UT 2003 without success. The version on the CDset
> >ist 2107. When installing (had some 10 trials-form different devices
> >ideDVD, scsi burner) everytime some files failed decompressing,
> It's possible you got a bad set of disks. A few Linux and win32 users
> have had similar problems.
> There is nothing that will fix this until you get a successful
> installation. Take your copy back to the store and get a replacement.
Sorry, for bothering again.
Dealer said: "Try RAM, try to install on a different PC"
Tried different RAM -> same problem.
Tried a differnet Hardware (Dell Inspiron 8200), everything is fine
Are there any know issues running UT2003 on this hardware (sorry
for long lines):
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11)
00:09.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11)
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
00:0a.1 Input device controller: Creative Labs SB Live! (rev 06)
00:0b.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8020
00:0c.0 SCSI storage controller: Adaptec AIC-7861 (rev 03)
00:0d.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 42)
00:11.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev a1)
In my setup hda/b is the first promise, hdc/d is the second
via and hde/f is the second promise (first via disabled by bios).
/dev/hde5 / ext2 defaults,errors=remount-ro 0 1
/dev/hdb6 none swap sw 0 0
proc /proc proc defaults 0 0
#/dev/fd0 /floppy auto defaults,user,noauto 0 0
/dev/cdrom /cdrom iso9660 defaults,ro,user,exec,noauto 0 0
/dev/hde1 /boot ext2 rw 0 2
/dev/hdb5 /opt reiserfs defaults 0 0
#/dev/dvd /dvd auto defaults,ro,user,exec,noauto 0 0
#/dev/scd0 /cdburn auto defaults,ro,user,noauto 0 0
# xfs logical volume
/dev/vg00/lv00 /multimedia xfs defaults,noauto,user,exec 0 0
Tried /opt und /multimedia. All other removeable devices commented,
since there is a bug in the install script to the effect of trying
to mount every singel removable device.
Since my _first_ problem is the decompress error I supposed the
problems might be based on the via southbridge bug, but fankly
speaking, I am not so familiar with this bug (SB live installed,
I would greatly appreciate any hint in this matter (excluding this
via-SB stuff would be so). TIA
 One of my friends, sorry, took some time to get there. However,
I installed&configured it, so the config should be quite close
More information about the ut2003