[mohaa] Question about server

[Steve Pirk]

Either do not set net_ip, or set it to the external
address.

--
Steve (egrep)

On Sun, 16 Feb 2003, Quint van Drostagen wrote:

> Thanks,
>
> But still not on gamespy... my port is open and my cfg file is ok now...
>
> One more question. Is it so that a can't see myself on gamespy because i'm
> behind nat????
>
> And i see the next things by my startup, is that promoted to gamespy???
>
> You are now setup for medium mode.
> Opening IP socket: 192.168.1.1:12203 <---- nat adress
> Hostname: Firewall
> IP: 212.129.223.97 <---- real adress on the outside
>
> +set net_IP 192.168.1.1 <---- in startup script.
>
> Which of these are promoted to gamespy, because i can understand that if my
> internal ip is promoted gamespy is rejecting me....
>
> Thanks
> Q
>
>
>
>
> Well it's indiferent. Set, sets, seta and setu basically does the same
> but with some special funcions:
>
> Set - set a variable
>
> Seta - sets the variable with the archive flag will save the last
> setting to q3config.cfg and reload that setting every time you run the
> game. Any changes to variables with an A for the class ID are
> automatically stored in q3config.cfg - this is for q3 but it's the same
>
> Sets - sets the variable with the serverinfo flag, so it will be
> transmitted from a server to connecting clients. (It will appear when
> using the serverinfo command)
>
> Setu - sets the variable with the userinfo flag, so it will be
> transmitted from a client to a server while connecting. (It will appear
> when using the dumpuser command)
>
>
> André Rivotti Casimiro
>
> -----Mensagem original-----
> De: Quint van Drostagen [mailto:quint at kaleplek.net]
> Enviada: domingo, 16 de Fevereiro de 2003 18:30
> Para: mohaa at icculus.org
> Assunto: Re: [mohaa] Question about server
>
> Hi Andre,
>
> just a question if got in my config file  : seta sv_gamespy "1".
>
> Is this right or is it what you describe bellow : set sv_gamespy 1.
>
> Without the "" and de a from seta.
>
> Thanks
> Q.
>
> Met vriendelijke groeten,
> Quint van Drosthagen
> ----- Original Message -----
> From: "André Rivotti Casimiro" <rivotti at netcabo.pt>
> To: <mohaa at icculus.org>
> Sent: Saturday, February 15, 2003 9:15 PM
> Subject: RE: [mohaa] Question about server
>
>
> Hi Quint,
>
> There's two possible reasons:
>
> 1 - You didn't use the 'set sv_gamespy 1' option in your
> configure file.
> 2 - You are running behind a firewall and need to open the port
> 12300.
>
> André Rivotti Casimiro
>
> -----Mensagem original-----
> De: Quint van Drostagen [mailto:quint at kaleplek.net]
> Enviada: sábado, 15 de Fevereiro de 2003 19:36
> Para: mohaa at icculus.org
> Assunto: Re: [mohaa] Question about server
>
> All,
>
> Many thanks for al the help. My server is up and running in the
> background...;-)
>
> The only thing now is that he isn't available in gamespy... I don't
> understand why... All my friends can connect dirrectly to my ip So it is
> working... Is there a way to see if gamespy is accepting my request???
>
> Is there a site to see what is happening????
>
> Thanks
> Q
>
>
>
> > All,
> >
> > I think this 2 question is stuppid in you're eyes, but i'm getting
> > desperate. After 3 long nights (upon 4 o'clock in the morning) still
> my
> > server is not up.
> >
> > Here are my questions :
> >
> > 1. When i startup my server everything is working fine, but the server
> is
> > not shown in gamespy or in mohaa itself. Now you think oooh you didn't
> > open you're upd/tcp ports.. That's not the issue all the ports (found
> on
> > several internet sites) are open. But to be sure here they are :
> >
> > ----------- iptables ---------------------------------------
> > -A INPUT -i eth1 -p udp -m udp --dport 12300  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 12210  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 12201  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 12203  -j ACCEPT
> > -A INPUT -i eth1 -p tcp -m tcp --dport 12203  -j ACCEPT
> > -A INPUT -i eth1 -p tcp -m tcp --dport 12204  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 12204  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 13139  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 27900  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 6500  -j ACCEPT
> > -A INPUT -i eth1 -p udp -m udp --dport 6515  -j ACCEPT
> > -A INPUT -i eth1 -p tcp -m tcp --dport 28900  -j ACCEPT
> > -A INPUT -i eth1 -p tcp -m tcp --dport 29900  -j ACCEPT
> > ----------------------------------------------------------
> >
> > When i do an tcpdump to see what traffic is coming in and out is see
> that
> > he has a connection to the master.gamespy.com
> >
> > Ok now you are getting blurry aren't you... I have the same thing, and
> are
> > pulling my hair out...
> >
> > Just to be sure i'm sending also my config files (i'm dutch so if you
> see
> > any dutch comment sorry) my startup script and an startupout.txt to
> let
> > you see what is happening by startup. The stranges thing is that i can
> > connect to my own server, and my key is fallidated bij gamespy (tried
> an
> > elegal key and got the error about cd-key).
> >
> >
> > PLEASSSSSSSSSSSSSSSSSSSSSSSSSS Help me... I'm getting gray
> hairs....;-)
> >
> > ok now question 2... When i'm firing up the server i wont get back on
> my
> > console. How can i do that so the server is running on background (The
> &
> > doesn't help because the server is stop working then).
> >
> >
> > Thanx
> > Q
> >
> >
>
>
>
>
>
>
>
>
>
>
>