[cod] High lag in 1.7

[Tyson]

Your mostly correct. EB recently up'd the max pixels. Everyone having issues simply needs adjust there settings and the lag should be minimal.

-----Original Message-----
From: "Kjell Munkestam" <kjell.munkestam at telia.com>
To: cod at icculus.org
Sent: 7/15/08 8:56 AM
Subject: RE: [cod] High lag in 1.7

Seems to be some slight confusion regarding the pb_sv_ss settings.

pb_sv_ssxpct/ssypct: These two values only represent where the SS is taken
and has nothing to do with SS size. So 50% for both means that the SS will
be centered in the screen. Set them to -1 and the SS will be placed
randomly.

pb_sv_width/height: Requsted pixel w/h of the SS. Note that SS is limited to
max 82,000 pixels.

pb_sv_sssrate: Sample rate.
1 = every pixel saved "what client see is what you get". 2 = every second
pixel saved - covering same size but output will be half in both directions,
giving less detail but only 1/4 the size. 4 = every fourth pixel saved.

More in "Screen Capture Facility" section at:
http://www.evenbalance.com/publications/cod4-ad/index.htm

/Kjell (aka Sgt Bilko)

-----Original Message-----
From: Minte van Dalen [mailto:minte.vandalen at planet.nl] 
Sent: den 15 juli 2008 14:18
To: cod at icculus.org
Subject: RE: [cod] High lag in 1.7


In the pb configs you got the X and Y percentage of the actual ss to take, I
had those 2 on 50% but I got the full image like specified with:

pb_sv_SsWidth 655 //[Requested pixel width of remote screenshots]
pb_sv_SsHeight 500 //[Requested pixel height of remote screenshots]
pb_sv_SsXpct 50 //[Percentage across screen for remote screenshots]
pb_sv_SsYpct 50 //[Percentage down screen for remote screenshots]

it gave me the full screenshots of 655x500.

I lowered the height and the width to 50% of the value above shown and now
the screenshots are in normal size again, and the lag is gone. pb_sv_SsWidth
340 //[Requested pixel width of remote screenshots] pb_sv_SsHeight 250
//[Requested pixel height of remote screenshots] pb_sv_SsXpct 50
//[Percentage across screen for remote screenshots] pb_sv_SsYpct 50
//[Percentage down screen for remote screenshots]

To me it seems that the X and Y value percentage doesn't work anymore, cause
with the lower resolution I get shots with 340x250. It's a small fix to
make, but it worked for me.

HarryRag

-----Original Message-----
From: Donald Stephens [mailto:donald.stephens at activant.com] 
Sent: dinsdag 15 juli 2008 14:09
To: cod at icculus.org
Subject: RE: [cod] High lag in 1.7

I turned off the auto screenshot for punkbuster. I run 6 servers on the same
box and it looks like its running smoother now. I think it has to do with
the size of the screenshot being requested by punkbuster.

My admins just have to request a screenshot when one is needed. 

-Don

-----Original Message-----
From: Scott Robinson [mailto:scott at srobinson.net] 
Sent: Tuesday, July 15, 2008 5:06 AM
To: cod at icculus.org
Subject: [cod] High lag in 1.7

Evening All,

I seem to be having problems on the 1.7 version of COD4. Since we 
upgraded allot of the clan members have been complaining about high lag.

Ive shutdown every other service on the server which leaves it with at 
least 5 times the amount of resources it requires but still high lag.

Anyone have any ideas as to where i can start with this problem?

Scott

---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org Mailing
list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
 
 
Notice: This transmission is for the sole use of the intended recipient(s)
and may contain information that is confidential and/or privileged.  If you
are not the intended recipient, please delete this transmission and any
attachments and notify the sender by return email immediately.  Any
unauthorized review, use, disclosure or distribution is prohibited.


---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org Mailing
list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38



---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org Mailing
list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38





---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38