[cod] Server wont start.

K.mintjes - Snelict k.mintjes at snelict.nl
Wed Dec 17 13:04:33 EST 2008


Cod4 server will be fine, and startup normally.
So there is nothing that block the servers.
The server will sit in the shell, till I press ctrl a+d or ctrl c..

So there is I think a dam small problem, why he doesn't start.

-----Oorspronkelijk bericht-----
Van: Donald Stephens [mailto:donald.stephens at activant.com] 
Verzonden: woensdag 17 december 2008 18:59
Aan: cod at icculus.org
Onderwerp: RE: [cod] Server wont start.

Is there a router between the machine and the internet? Is the port
open? After starting the server does it sit there hung at the shell
until you crash it with "CTRL C" ?

-----Original Message-----
From: K.mintjes - Snelict [mailto:k.mintjes at snelict.nl] 
Sent: Wednesday, December 17, 2008 9:55 AM
To: cod at icculus.org
Subject: RE: [cod] Server wont start.

Still not online.

Putty give me know the following:

ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: No
such
file or directory
Application tried to create a window, but no driver could be loaded.
Make sure that your X server is running and that $DISPLAY is set
correctly.
Application tried to create a window, but no driver could be loaded.
Make sure that your X server is running and that $DISPLAY is set
correctly.
err:ole:apartment_createwindowifneeded CreateWindow failed with error 2
err:ole:CoGetClassObject class {9a5ea990-3034-4d6f-9128-01f3c61022bc}
not
registered
err:ole:CoGetClassObject no class object
{9a5ea990-3034-4d6f-9128-01f3c61022bc} could be created for context 0x1
fixme:thread:SetThreadIdealProcessor (0x68): stub
err:wgl:process_attach X11DRV or GDI32 not loaded. Cannot create default
context.
err:d3d:InitAdapters Can't load opengl32.dll!
err:d3d:WineDirect3DCreate Direct3D9 is not available without opengl
fixme:thread:SetThreadIdealProcessor (0x80): stub
fixme:faultrep:ReportFault 0x32f8f0 0x0 stub

So it looks like it's the same as yours.

But still the server stay down.
Server.cfg is in the main folder where it belongs.
Its weird..


-----Oorspronkelijk bericht-----
Van: dnk [mailto:d.k.emaillists at gmail.com] 
Verzonden: woensdag 17 december 2008 18:46
Aan: cod at icculus.org
Onderwerp: Re: [cod] Server wont start.

Well if SELinux is on, disable that and try again.

Then post back if that works.

d



On 17-Dec-08, at 9:34 AM, K.mintjes - Snelict wrote:

> I take the last one from fpsadmin.com, with the RPM files.
> And nope I didn't anything  custom on the server, The server is 32  
> bit.
> I saw that selinux was on, properly the wrong command before  
> installing
> everything.
> And he stay in the console, no exits.
> And nope didn't have a firewall on.
>
>
> -----Oorspronkelijk bericht-----
> Van: dnk [mailto:d.k.emaillists at gmail.com]
> Verzonden: woensdag 17 december 2008 18:27
> Aan: cod at icculus.org
> Onderwerp: Re: [cod] Server wont start.
>
> I was looking at your errors, and I noticed that yours has:
>
> err:ole:apartment_createwindowifneeded CreateWindow failed with  
> error 0
>
>
> And mine has:
>
> err:ole:apartment_createwindowifneeded CreateWindow failed with  
> error 2
>
> So I am trying to figure out what is different from mine to yours.
> When you installed it, did you use the installer script that compiles
> wine, or the one that uses the RPM's? Did you do anything custom on
> your install as far as package selection? 32 bit or 64 bit?
>
>
> When i start my server, this is normal:
>
> Application tried to create a window, but no driver could be loaded.
> Make sure that your X server is running and that $DISPLAY is set
> correctly.
> err:ole:apartment_createwindowifneeded CreateWindow failed with  
> error 2
> err:ole:CoGetClassObject class {9a5ea990-3034-4d6f-9128-01f3c61022bc}
> not registered
> err:ole:CoGetClassObject no class object
> {9a5ea990-3034-4d6f-9128-01f3c61022bc} could be created for context  
> 0x1
> fixme:thread:SetThreadIdealProcessor (0x68): stub
> err:wgl:process_attach X11DRV or GDI32 not loaded. Cannot create
> default context.
> err:d3d:InitAdapters Can't load opengl32.dll!
> err:d3d:WineDirect3DCreate Direct3D9 is not available without opengl
> fixme:thread:SetThreadIdealProcessor (0x80): stub
>
> And the console will just hang there. Does your console hang, or exit
> back out to the command prompt? Do you have a firewall on, or SELinux?
>
>
> Dnk
>
>
>
>
> On 17-Dec-08, at 8:51 AM, K.mintjes - Snelict wrote:
>
>> Mine actual startup command is the following:
>>
>> screen wine CoDWaWmp.exe -- +set dedicated 2 +set net_ip
>> 93.190.139.209 +set
>> net_port 28960 +set sv_punkbuster 1 +exec server.cfg +map_rotate
>>
>> and in the startup.sh is the startup line the same..
>>
>> The server gives me only a lot of errors (see first mail).
>>
>> And doesn't start up.
>>
>> -----Oorspronkelijk bericht-----
>> Van: Dnk [mailto:d.k.emaillists at gmail.com]
>> Verzonden: woensdag 17 december 2008 17:45
>> Aan: cod at icculus.org
>> Onderwerp: Re: [cod] Server wont start.
>>
>> What is your actual startup command?
>>
>> Also, are you using the startup script that the installer script can
>> generate for you?
>>
>> Dnk
>>
>> Sent from my iPhone
>>
>> On 17-Dec-08, at 7:37 AM, "K.mintjes - Snelict"  
>> <k.mintjes at snelict.nl>
>> wrote:
>>
>>> Hi,
>>>
>>>
>>>
>>> I had followed the latest tutorial which I could find on
>>> fpsadmin.com, to setup a cod5 server with wine and centos.
>>>
>>> Only the problem is when ill start up the server ill get the
>>> following:
>>>
>>>
>>>
>>> ALSA lib seq_hw.c:457:(snd_seq_hw_open) open /dev/snd/seq failed: No
>>> such file or directory
>>>
>>> Application tried to create a window, but no driver could be loaded.
>>>
>>> Make sure that your X server is running and that $DISPLAY is set
>>> correctly.
>>>
>>> err:ole:apartment_createwindowifneeded CreateWindow failed with
>>> error 0
>>>
>>> err:ole:CoGetClassObject class
>>> {9a5ea990-3034-4d6f-9128-01f3c61022bc} not registered
>>>
>>> err:ole:CoGetClassObject no class object
>>> {9a5ea990-3034-4d6f-9128-01f3c61022bc} could be created for context
>>> 0x1
>>>
>>> fixme:thread:SetThreadIdealProcessor (0x64): stub
>>>
>>> err:wgl:process_attach X11DRV or GDI32 not loaded. Cannot create
>>> default context.
>>>
>>> err:d3d:InitAdapters Can't load opengl32.dll!
>>>
>>> err:d3d:WineDirect3DCreate Direct3D9 is not available without opengl
>>>
>>> fixme:thread:SetThreadIdealProcessor (0x78): stub
>>>
>>> fixme:faultrep:ReportFault 0x32f8f0 0x0 stub
>>>
>>>
>>>
>>> And the server stop loading, It is opened now for 10 minutes.
>>>
>>> The whole server setup was finished without any error.
>>>
>>>
>>>
>>> What is happened up here, and how I can fix this..?
>>>
>>>
>>>
>>> System is a centos server.
>>>
>>>
>>>
>>> Thanks.
>>>
>>>
>>>
>>> Dutchy88
>>>
>>>
>>>
>>>
>>
>> ---
>> To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
>> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
>>
>>
>>
>> ---
>> To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
>> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
>>
>>
>
>
> ---
> To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
>
>
>
> ---
> To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
> Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
>
>


---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38



---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38
 
 
Notice: This transmission is for the sole use of the intended recipient(s)
and may contain information that is confidential and/or privileged.  If you
are not the intended recipient, please delete this transmission and any
attachments and notify the sender by return email immediately.  Any
unauthorized review, use, disclosure or distribution is prohibited.


---
To unsubscribe, send a blank email to cod-unsubscribe at icculus.org
Mailing list archives: http://icculus.org/cgi-bin/ezmlm/ezmlm-cgi?38





More information about the Cod mailing list