[cod] Can't find server on web.

[H. I. Kumpeli]

Indeed, the matter does not lie in the IP config as it is now. If you're
sure the router forwarding is setup correctly then it's the firewall on your
Ubuntu box that is blocking that specific port.

 

Van: Kenny Southpark [mailto:afp_kenny at hotmail.com] 
Verzonden: vrijdag 4 april 2008 1:26
Aan: cod at icculus.org
Onderwerp: RE: [cod] Can't find server on web.

 

 
 Nils,
  
Have you tried not setting the IP and port, if the box has only 1 NIC/IP
then there should be no reason to state it, and if you are using the default
port then there is no reason to state that as well. As far as the dedicated
command goes it wouldnt matter what you set it at at the moment (1 or 2) as
the switch is brioken and always runs as an internet server.
 
I would be checking to see what the firewall on the server is doing..... You
talked about portforwarding on your  external dhcp/router but not what you
have running on the server itself...
 


 

  _____  

Date: Fri, 4 Apr 2008 11:41:00 +1300
From: Craig at craignimmo.com
To: cod at icculus.org
Subject: RE: [cod] Can't find server on web.

Hi Nils,

 

You'll need to change the IP you are using as the 10.0.x.x is an internal
network IP, so you will never see this on the web.

 

You'll need to set the IP based on the external IP of your server - which it
is not clear that you have done that.

 

Regards

 

Craig.

 

  _____  

From: nils iver tolaas [mailto:nilsiver at gmail.com]
Sent: Fri 4/04/2008 10:14 a.m.
To: cod at icculus.org
Subject: [cod] Can't find server on web.

Hi.

Im tryin to set up a cod4 server. Had one up and runnin on fedora some weeks
ago, but the mainboard chrashed so i got a new one and some more upgrades
and wanted to try ubuntu. Forgot to take backup of configs and now ill have
to start all over again. The problem is that i can't find it on web, but
only in local area. When i use the port scan on whatsmyip.org
<http://whatsmyip.org/>  the port 28960 appears closed. Have tried +set
net_ip both localhost, internet ip, and lan ip. Ports at the router shall be
forwarded right 28960, 20800 and 20810 (i run a ventrilo server on the same
pc and that one works well on the web). Tried several configs but no
success. +set dedicated 2 is done i the startupcommand. Can it be the
"dedicated is read only" line that makes the trouble and locks it to local?

dedicated is read only.
Opening IP socket: 10.0.0.2:28960 <http://10.0.0.2:28960/> 
Hostname: znserv.lan
IP: 10.0.0.2 <http://10.0.0.2/> 
dedicated is read only.



Nils Iver

 

  _____  

More immediate than e-mail? Get instant access with Windows Live Messenger.
<http://www.windowslive.com/messenger/overview.html?ocid=TXT_TAGLM_WL_Refres
h_instantaccess_042008> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://icculus.org/pipermail/cod/attachments/20080404/440c93da/attachment.htm>