[cod] sorry edit

Jay Vasallo jayco1 at charter.net
Sat Mar 26 15:00:51 EST 2005


NP... map_rotate is always the last thing the server line should do. Glad i 
could help you.

----- Original Message ----- 
From: "Mr Sentry" <mrsentry at gmail.com>
To: <cod at icculus.org>
Sent: Saturday, March 26, 2005 2:57 AM
Subject: Re: [cod] sorry edit


> Jay,
> I fixed it! don't know how (lol)
> I believe it was the +map_rotate
> I did'nt have it on the end.
> thank you for your fast reply,
> If you would like the logs (when it would freeze, there was no logs)
> or the server config
> just let me know.
> Thank you for your time.
> Dana
>
>
> On Sat, 26 Mar 2005 00:47:56 -0600, Jay Vasallo <jayco1 at charter.net> 
> wrote:
>> http://files.clanwarz.net/temp/codhelp.txt
>>
>> You can see it better here. The mail gets crunched up a bit.
>>
>>
>> ----- Original Message -----
>> From: "Jay Vasallo" <jayco1 at charter.net>
>> To: <cod at icculus.org>
>> Sent: Saturday, March 26, 2005 12:39 AM
>> Subject: Re: [cod] sorry edit
>>
>> > Sup Dana,
>> >
>> > Can you append  the server log and email it back to us so we can see 
>> > the
>> > last thing the server tried to do. The server log is normally in the 
>> > mod
>> > you are trying to start. And I am not completely sure but you can 
>> > remove
>> > this:
>> >
>> > +set fs_homepath /home/cod2/cod
>> >
>> > If I am not mistaken, that is used if you are starting the cod game in
>> > another location. Normally you start it and then point to the homepath 
>> > for
>> > the user. But that is not your problem atm thou.
>> >
>> > You also have the "&" sign at the end of the command. That is used if 
>> > you
>> > are not using screen.  Not sure if you missed the
>> > _ under the map_rotate but it doesn't show. Try this for a command 
>> > line:
>> >
>> > #!/bin/sh
>> > start=`date '+%H:%M on %d/%m/%y'`
>> > echo "swat server started @ $start">>/home/cod2/swat.log
>> > screen -dmS CoD ./cod_lnxded +set dedicated 2 +set net_ip 67.19.211.218
>> > +set net_port 28960 \
>> > +set fs_basepath /home/cod2/cod +set fs_game swat +exec dedicated.cfg
>> > +map_rotate \
>> >
>> > and if you need the homepath in there here it is:
>> >
>> > #!/bin/sh
>> > start=`date '+%H:%M on %d/%m/%y'`
>> > echo "swat server started @ $start">>/home/cod2/swat.log
>> > screen -dmS CoD ./cod_lnxded +set dedicated 2 +set net_ip 67.19.211.218
>> > +set net_port 28960 \
>> > +set fs_homepath /home/cod2/cod +set fs_basepath /home/cod2/cod +set
>> > fs_game swat  \
>> > +exec dedicated.cfg +map_rotate \
>> >
>> >
>> > If you noticed I use the " \ " sign one space after the last command I
>> > want on that line. It tells the linux server to start
>> > to read the next line. Good for troubleshooting because you can always 
>> > see
>> > the script in front of you and nothing off the screen.
>> >
>> > Hope this helps you.
>> > =o)
>> >
>> >
>> >
>> > ----- Original Message -----
>> > From: "Mr Sentry" <mrsentry at gmail.com>
>> > To: <cod at icculus.org>
>> > Sent: Saturday, March 26, 2005 12:22 AM
>> > Subject: [cod] sorry edit
>> >
>> >
>> >> Sorry when I copied and pasted I did'nt proof read
>> >> I have been try to get a cod SWAT mod server up and running with no
>> >> results
>> >>
>> >> the server is running RHEL 3.0
>> >> and it will just not run!
>> >>
>> >> On the same server I have a Revolt_UO server up and it runs just fine!
>> >> not a single crash!
>> >>
>> >> I followed the instructions as per the devlopers and "no go"
>> >> and no logs either. it shows running in the process list (ps -A)
>> >> and I start the server through a shell script like this
>> >>
>> >> #!/bin/sh
>> >> start=`date '+%H:%M on %d/%m/%y'`
>> >> echo "swat server started @ $start">>/home/cod2/swat.log
>> >> # the following is one single line
>> >> screen -A -m -d -S CoD ./cod_lnxded
>> >> +set dedicated 2 +set net_ip 67.19.211.218 +set net_port 28960 +map
>> >> rotate +set fs_homepath /home/cod2/cod +set fs_basepath /home/cod2/cod
>> >> +set fs_game swat +exec dedicated.cfg&
>> >>
>> >> I am completly baffled
>> >> I have been a quake3 linux server admin for 4 years and I can not
>> >> figure this out!
>> >> any suggestions or help would be greatfully apreciated (gg spelling)
>> >>
>> >> Thank you
>> >> Dana
>> >> --
>> >> --==## Who Frags Ya? Baby ##==--
>> >>
>> >
>> >
>>
>>
>
>
> -- 
> --==## Who Frags Ya? Baby ##==--
> 




More information about the Cod mailing list