[cod] Server Low memory usage

[Jay Vasallo]

Dunno, I never did look at it that way. I just make sure that i have about 1 gig left over in cache when all the servers are jamming.


  ----- Original Message ----- 
  From: Fredric Ollikala 
  To: cod at icculus.org 
  Sent: Wednesday, February 23, 2005 10:28 AM
  Subject: Re: [cod] Server Low memory usage


  its really weird. How much memory does your servers use for lets say a 20 slot  UO-server, S&D? 

    ----- Original Message ----- 
    From: Jay Vasallo 
    To: cod at icculus.org 
    Sent: Wednesday, February 23, 2005 5:25 PM
    Subject: Re: [cod] Server Low memory usage


    weird...I would place a hunkmeg command then....but it should take.
      ----- Original Message ----- 
      From: Fredric Ollikala 
      To: cod at icculus.org 
      Sent: Wednesday, February 23, 2005 9:55 AM
      Subject: Re: [cod] Server Low memory usage


      didnt do anything, still 60 mb utilized. and i dont have a hunkmegs setting for the one that uses 160 mb either..
        ----- Original Message ----- 
        From: Jay Vasallo 
        To: cod at icculus.org 
        Sent: Wednesday, February 23, 2005 4:49 PM
        Subject: Re: [cod] Server Low memory usage


        Try putty this in your command line

        +set com_HunkMegs 200


          ----- Original Message ----- 
          From: Fredric Ollikala 
          To: cod at icculus.org 
          Sent: Wednesday, February 23, 2005 9:43 AM
          Subject: [cod] Server Low memory usage


          I have a problem with my UO-servers. Most of them use only about 60 mb of RAM while i have one using about 160 mb. I have tried to increase the memory to the other servers as i have seen great performance differences between the one that uses 60 mb and the 160 mb one. If i copy the cfgfile from a user that uses 160 mb to the user that uses 60 mb and start the server, then it runs with 160 mb. I cant just copy the content from the working 160 mb server cfg and put in a new cfg and run, it still uses only 60 mb. I don´t know how to fix so every server uses the correct amount of memory, therefore i need your help. I tried starting a dedicated UO-server on my windows box and it also uses about 200 mb of RAM, so i guess about 60 is not correct. I run Red hat 9 on one box and Centos 3.4 on another and can still only run uo-servers with 60 mb of RAM utilization, unless i run them with the configfile that uses 160 mb. The cfgs are almost identical except that the content are put in a different order. They use standard setting for com_hunkmegs too. I don´t know what i might be missing so please help :)

          Fredric
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://icculus.org/pipermail/cod/attachments/20050223/2dc467b5/attachment.htm>