[cod] What Harware you use? A few Questions.

Luke luke at techfreak.org
Fri Oct 1 14:34:40 EDT 2004


Geez.... can we just settle this once and for all? Its NOT a 'horse
power' problem or a 'configuration' problem. The UO engine combined
with vehicles and certain maps cause VERY high cpu usage accross the
board.

Hopefully, a patch will address this.

Luke

admin at typhoonservers.com said:
> I understand and agree with Steve "one smart cookie"
> I just posted this as a general overview.
>
> Seems that most of the problems are on single cpu boes and not know
> if HT is
> enabled kinda leeds me to think not enought horse power on those
> boxes....just a guess.
> TLP
> ----- Original Message -----
> From: "Jay Vasallo" <haze at clanwarz.net>
> To: <cod at icculus.org>
> Sent: Friday, October 01, 2004 10:57 AM
> Subject: Re: [cod] What Harware you use? A few Questions.
>
>
>> But then of course, you are looking at the virtual settings, since
>> you are
>> running ht, so your readings are inacurrate. This we have touched
>> on. Look
>> back in your emails and watch for Steves Comment.
>>
>>
>>
>> ----- Original Message -----
>> From: <admin at typhoonservers.com>
>> To: <cod at icculus.org>
>> Sent: Friday, October 01, 2004 5:36 AM
>> Subject: Re: [cod] What Harware you use? A few Questions.
>>
>>
>> > Dual Xeon 2.8 ht
>> > 3gb ddr 3200 ram
>> > 2 x 73 gb scsi
>> >
>> > We run 8 UO servers on this box, max total CPU "divided by 4" is
>> 35~45%.
>> >
>> > Now bear in mind not alll servers full..can't seem to get
>> everyone
> online
>> > at
>> > once...lol
>> >
>> > TLP
>> > ----- Original Message -----
>> > From: "Carlo Moretto" <Carlo at LondonEngland.co.uk>
>> > To: <cod at icculus.org>
>> > Sent: Friday, October 01, 2004 6:51 AM
>> > Subject: RE: [cod] What Harware you use? A few Questions.
>> >
>> >
>> >> I run a dual pentium 3 900mhz with 1.5gb ram on mandrake linux.
>> I run 3
>> >> 26 slot servers (2 cod, 1 uo) and with 50+ players, processors
>> run at
>> >> about 50%ish
>> >>
>> >> Carl
>> >>
>> >> -----Original Message-----
>> >> From: Peter Schwartz [mailto:schwartz_914 at hotmail.com]
>> >> Sent: 01 October 2004 09:24
>> >> To: cod at icculus.org
>> >> Subject: [cod] What Harware you use? A few Questions.
>> >>
>> >>
>> >> Still gathering some info for our new server set up, a few
>> Questions.
>> >>
>> >> 1. For those that use Multiprocessor Machines, Does COD use it
>> (i.e -
>> >> could
>> >> I start one process on CPU 1 and another on CPU 2)
>> >>
>> >> 2. AMD Opterons - How would a single opteron system go?
>> >>
>> >> 3. Does anyone have a basic p4 3.2, or AMD64 Machine, if so -
>> How does
>> >> it
>> >> run COD:UO?
>> >>
>> >> Obviously things like RAM and Distro of Linux will make a
>> difference,
>> >> but
>> >> I'm mostly concerned about the CPU usage. (i.e - Get a smaller
>> machine,
>> >> and
>> >> not be able to run UO properly, or get a kick arse machine and
>> not
>> >> needed to
>> >> spend the cash.)
>> >>
>> >> Pete
>> >>
>> >>
>> >>
>> >
>> >
>>
>>
>>
>>
>


-- 
www.frankenworks.com - headquarters for linux game admins.



More information about the Cod mailing list