[bf1942] Two identical boxes... two different usages?

[Kingsley Foreman]

whn i load mine it stays at about 30% for a min and then drops down to about
8%
and stays there
----- Original Message -----
From: "Alex Lembesis" <alex at elitedesigns.net>
To: <bf1942 at icculus.org>
Sent: Tuesday, January 21, 2003 1:28 AM
Subject: RE: [bf1942] Two identical boxes... two different usages?


> Nope, there are no players in either of the servers.
>
> -----Original Message-----
> From: Killing [mailto:killing at barrysworld.com]
> Sent: Monday, January 20, 2003 9:59 AM
> To: bf1942 at icculus.org
> Subject: Re: [bf1942] Two identical boxes... two different usages?
>
>
> You dont / shouldn't its done dynamically by the kernel. Most likely 1
> server has
> more players.
>
>     Steve / K
> ----- Original Message -----
> From: "Alex Lembesis" <alex at elitedesigns.net>
> To: <bf1942 at icculus.org>
> Sent: 20 January 2003 14:46
> Subject: [bf1942] Two identical boxes... two different usages?
>
>
> I have two linux bf servers running off of identical machines.  RH 7.2, P4
> 2.0GHz 512 RAM 100mbit connection.  Check out what top reports from the
two
> of them.
>
> bfsrv01
>  10:43am  up  8:54,  1 user,  load average: 0.00, 0.00, 0.00
> 25 processes: 23 sleeping, 2 running, 0 zombie, 0 stopped
> CPU states:  7.5% user,  1.8% system,  0.0% nice, 90.5% idle
> Mem:   514104K av,  136764K used,  377340K free,       0K shrd,    4468K
> buff
> Swap: 1044216K av,       0K used, 1044216K free                   62108K
> cached
>
>   PID USER     PRI  NI  SIZE  RSS SHARE STAT %CPU %MEM   TIME COMMAND
>   972 xsbf1942  15   0 75800  74M 15988 S     5.6 14.7  31:39
bf1942_lnxded
>
> bfsrv02
>  10:33am  up 24 min,  1 user,  load average: 0.43, 0.31, 0.17
> 25 processes: 22 sleeping, 3 running, 0 zombie, 0 stopped
> CPU states: 50.0% user,  2.9% system,  0.0% nice, 47.0% idle
> Mem:   514104K av,  141012K used,  373092K free,       0K shrd,    4312K
> buff
> Swap: 1044216K av,       0K used, 1044216K free                   62444K
> cached
>
>   PID USER     PRI  NI  SIZE  RSS SHARE STAT %CPU %MEM   TIME COMMAND
>  1033 dygital   17   0 78624  76M 15580 R    49.4 15.2   2:15
bf1942_lnxded
>
> My question is... Look at the PRI.  bfsrv02 has much higher CPU
utilization
> with a PRI of 17.  bfsrv01 has much lower CPU utilization on PRI 15.  How
do
> I change this PRI?
>
>
>